Aux Source - LENCO SBW-800 Mode D'emploi

AUX Source:

1: Ensure that the soundbar is connected to the TV or other audio
device via an AUX cable.
2: Long press the "M" button on the Remote control until you hear
the voice "Auxillary". You also can short press the source button
on the soundbar to choose the AUX source.
OPTICAL IN Source:
1. Ensure that the soundbar is connected to the TV or other audio
device via an Optical cable.
2. Long press the "M" button on the remote control various times
until you hear the voice "optical". You can also short press the
source button on the soundbar to choose the Optical source.
LINE IN Source:
1: Ensure that the soundbar is connected to the TV or other audio
device via an audio cable (3.5mm jack).
2: Long press the "M" button on the remote control various times
until you hear the voice "Line in". You can also short press the
source button on the soundbar to choose the LINE IN source.
TV OPTICAL
13