Guide plate
Core bit
(outer diameter)
1-1/4" (32 mm)
1-3/8" (35 mm)
1-1/2" (38 mm)
1-3/4" (45 mm)
4. Demolishing operation (Hammering only)
Bull point (Round type) (SDS-plus shank)
Code No. 303046
Bull point (Square type) (SDS-plus shank)
Code No. 316656
5. Groove digging and edging (Hammering only)
Cold chisel (SDS-plus shank)
Code No. 316657
Cutter (SDS-plus shank)
Code No. 316658
6. Grooving (Hammering only)
Grooving chisel (SDS-plus shank)
Code No. 316659
Core bit
Code No.
(outer diameter)
2" (50 mm)
982686
2-9/16" (65 mm)
982687
3-5/32" (80 mm)
982688
982689
3-17/32" (90 mm)
Code No.
982690
982691
982692
982693
English
23