Getting Started - Steba MX 600 Smart Mode D'emploi

Getting started

∙
Never let the device run empty, the motor may overheat.
∙ Only fill the appliance with solid food up to 1250ml and add some liquid. Liquid
food can be mixed up to 1750ml.
∙ Place the glass jar with its 2 grooves on the motor part.
∙ Put the lid on top and engage with rotary motion to the handle.
∙ Only open the refill opening in the lid during mixing if liquids or spices are to be
able.
∙ The maximum mixing time should not exceed 2 minutes, then let the device cool
down for 1 minute.
∙ If the overtemperature protection of the motor triggers, pull the plug and allow
the device to cool down.
Mixing
∙ Plug in the device, the power button flashes. If the button is pressed, the LED lights
up.
∙ If the SMART Control button is pressed, the LED flashes.
∙ The automatic program runs with different speeds and mixing times. Depending
on the type and quantity of food (hard or soft), the device determines the opti-
mum consistency and turns off automatically once it is obtained.
∙ After mixing, press the power button and pull the plug.
∙ Note: empty the glass jar after mixing. Do not store food in it for a longer time and
carefully clean the jar.
11