Charging The Power Bank - KREAFUNK toCHARGE MINI Manuel D'utilisation

2. GENERAL OPERATION
METHODS

2.1 Charging the power bank:

Please recharge your power bank
on your computer via the USB port
or with a USB compatible wall
charger (output 5V 1A).
The LED light will keep flashing
red during charging and stop
flashing become solid red when the
power bank is fully charged. When
the power bank is fully charged,
disconnect the USB cable and the
red LED light will shut off.
2.2
Select a 5V USB charger or a
compatible charger (not provided in
the box) and cable to connect your
power bank and digital device. The
toCHARGE MINI power bank will
charge the device automatically
when the device is connected.
Once you begin charging, the LED
light will activate and become solid
blue during charging. The LED light
will flash blue to remind you that
the battery is low capacity during
charging. The power bank will shut
off automatically and the blue LED
light will turn off from flashing if
eth power bank is out of power. To
ensure a long lifetime of the power
bank we advise you to recharge
toCHARGE MINI when the LED light
begins to flash blue.
2.3
The toCHARGE power bank will
be shut off automatically after
10 seconds, when charging is
finished.
2.4
If the device is removed from the
power bank during charging, the
blue LED light and output will shut
off after 15 seconds.
English
7