DVD VCD CD SA-CD DVD-A
2
Press the OPEN/CLOSE button (L) to open the tray.
3
Insert the disc label side up.
< In the case of double-sided discs, the side to be played should
be face down.
< Make sure the disc is centered in the tray in order to avoid
any malfunction or jamming of the tray or damage to the
disc.
4
Press the OPEN/CLOSE button (L) again to close the
tray.
The tray will close. Take care that you don't catch your fingers
in the tray.
The unit reads the disc (this may take a little time).
Some discs may automatically start playback.
5
Press the PLAY button to start playback if playback has
not started automatically.
If a menu is shown on screen (some DVD or video discs may
show such a menu), see the next section.
18
Playback
On-screen menu
An on-screen menu is shown when a DVD or video CD with
playback control (PBC) content is loaded.
The way in which the menu works may differ from disc to
disc.
DVD menus
Use the cursor buttons to select the menu item from a DVD,
and confirm the selection using the ENTER button.
Returning to the menu screen
Press either the MENU button or (to return to the top menu)
the TOP MENU button.
< Depending on the disc, pressing MENU or TOP MENU during
playback may restart playback from the first chapter.
< This function is not available with a DVD-RW disc with VR
content.
Playback control (with PBC enabled) video CDs
With these discs, the number buttons can sometimes be used
to select menu items.