Channel List; Add Channels - Magnavox 37MD350B Manuel De L'utilisateur

 Channel List
The channels selected here can be skipped when selecting the channels
+ -
using [CH / ].
Those channels can still be selected with [the Number buttons].
1
Press [MENU] to display the main menu.
2
[Cursor K/L] to select "SETUP", then press [OK].
3
Use [Cursor K/L] to select "Channel List", then press
[OK].
4
Use [Cursor K/L] to select the channel you want to
remove, then press [OK].
• The channel display for the removed channel
darkens. You will not be able to select the channel
+ -
again using [CH /
• To reactivate a removed channel, use [Cursor K/L] and
press [OK]. The registered channels are highlighted.
• When you remove a main channel, its subchannels
are removed as well.
Note:
• The channel with the "DTV" indicated on the display is
ATSC. Otherwise the channel is NTSC.
5
Press [MENU] to exit.
PICTURE Autoprogram
SOUND

Channel List

Add Channels

SETUP
FEATURES Antenna
LANGUAGE
DVD
PICTURE Autoprogram
SOUND Channel List
SETUP Add Channels
FEATURES Antenna
LANGUAGE
DVD
PICTURE DTV
SOUND DTV
SETUP DTV
Highlight channels for Ch Up/Down key
FEATURES
selection.
LANGUAGE
DVD
BACK
Ch Select Watch/Skip
OK
].
 Add Channels
This function lets you add the channels that were not added by the
autoprogram due to the receptible condition at the initial setting.
1
Press [MENU] to display the main menu.
2
[Cursor K/L] to select "SETUP", then press [OK].
3
Use [Cursor K/L] to select "Add Channels", then press
[OK].
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [OK].
11.1
11.2
11.3
Back
5
Press [MENU] to exit.
Note:
• If setup completes successfully,
"Added to the channel list" is displayed.
• If external input is used, it is not possible to register the
channel and "Unavailable" will be displayed on the TV
screen.
• By using [CH
channels only.
PICTURE Autoprogram
SOUND Channel List
SETUP Add Channels
FEATURES Antenna
LANGUAGE
DVD
PICTURE Autoprogram
SOUND Channel List
SETUP Add Channels
Antenna
FEATURES
LANGUAGE
DVD
PICTURE
SOUND For analog channels, select a channel to be
added using number keys.
SETUP
For digital channels, you must perform
FEATURES
Autoprogram function.
LANGUAGE
DVD
Ch Change
], you can select the memorized
+ -
/ ] ]
11
Add channels
BACK
Back
23 23
EN