Optional Setting; Main Menu; Autoprogram - Magnavox 37MD350B Manuel De L'utilisateur

O O
PTIONAL SETTING
 Main Menu
This section describes the overview of the main menu displayed when you
press [MENU]. For more details, see the reference page for each item.
The main menu consists of the function setting items below.
Press [MENU].
You can adjust the picture quality.
Refer to "Picture Adjustment" on page 25.
SOUND
You can adjust the sound quality.
Refer to "Sound Adjustment" on page 26.
SETUP
• You can automatically scan the viewable channels.
Refer to "Autoprogram" on page 22.
• You can skip the undesired channels when selecting
the channels using [CH
Refer to "Channel List" on page 23.
• You can add the channels that were not scanned by
the autoprogram.
Refer to "Add Channels" on page 23.
FEATURES
• You can change the display format for closed
caption, which displays the dialogue of a TV program
or other information across the TV screen.
Refer to "Closed Caption" on page 27.
• You can set the viewing limitations.
Refer to ''Child Lock" on page 30.
• You can adjust the position, stability and clarity of the
PC screen.
Refer to "PC Settings" on page 34.
• You can select the energy saving mode.
Refer to "Energy Saving Mode" on page 35.
• When you adjust the desired "PICTURE" and "SOUND"
mode, you must switch the setting from "Retail" to
"Home". Refer to "Location" on page 35.
• You can confirm the version of the software currently
used in this unit.
Refer to "Current Software Info" on page 36.
LANGUAGE
You can change the language (English, Spanish,
French) displayed on the main menu.
Refer to "Language Selection" on page 24.
DVD
You can customize some functions for the disc
playback. Make sure the unit is in stop mode.
Refer to "DVD SETTING" section on page 46.
22 22
EN
PICTURE Smar t Picture Personal
SOUND Brightness
SETUP
Contrast
FEATURES Color
LANGUAGE Tint
DVD Sharpness
Color Temperature Normal
+ -
/ ].
 Autoprogram
p g
If you switch wires (e.g., between antenna and CATV) or if you move the
unit to a different area after the initial setting, or if you restore the DTV
channel you deleted, you will need to perform autoprogram.
Before you begin:
Make sure the unit is connected to antenna or cable.
1
Press [MENU] to display the main menu.
2
Use [Cursor K/L] to select "SETUP" , then press [OK].
30
60
36
0
0
3
Use [Cursor K/L] to select "Autoprogram", then press
[OK].
Use [Cursor K/L] to select an appropriate option, then
press [OK].
• When aerial antenna is connected, select "Antenna".
• When connected to CATV, select "Cable".
• "Autoprogram" will begin.
• When the scanning and memorizing are completed,
the lowest memorized channel will be displayed.
Note:
• After setting "Autoprogram", using [CH
control skips unavailable programs automatically.
• If you are not receiving a signal from your cable service,
contact the Cable provider.
• If you press [y y (power)] or
the setting will be canceled.
• Even if "Autoprogram" is completed, the channel setting
will be lost if the AC power cord is unplugged before
turning off the unit by pressing [y y (power)].
• The PIN Code will be required once you set a PIN Code in
the "Child Lock". Refer to page 30.
• If you want to change your PIN Code, follow the instruction
of "Change PIN". Refer to page 33.
PICTURE

Autoprogram

SOUND Channel List
SETUP Add Channels
FEATURES Antenna
LANGUAGE
DVD
PICTURE Autoprogram
SOUND Channel List
SETUP Add Channels
FEATURES Antenna
LANGUAGE
DVD
PICTURE
SOUND Autoprogram will rescan all channels.
Autoprogramming will take up to 20 minutes
SETUP
to complete.
FEATURES
Select your signal source.
LANGUAGE
Antenna
DVD
Or
Cable
ANT.IN
Now the system is scanning for channels, please wait.
Auto programming will take up to 20 minutes to complete.
75%
Analog channels 10 ch
Digital channels 6 ch
MENU
Exit
] on the remote
+ -
/
[MENU] during autoprogram,
] ]
Back
Antenna
Cable