Regarding Lithium-Ion Battery Transportation; Wireless Technology - HIKOKI RP 3608DB Mode D'emploi

English
REGARDING LITHIUM-ION BATTERY
TRANSPORTATION
When transporting a lithium-ion battery, please observe
the following precautions.
WARNING
Notify the transporting company that a package contains a
lithium-ion battery, inform the company of its power output
and follow the instructions of the transportation company
when arranging transport.
○ Lithium-ion batteries that exceed a power output of
100Wh are considered to be in the freight classifi cation
of Dangerous Goods and will require special
application procedures.
○ For transportation abroad, you must comply with
international law and the rules and regulations of the
destination country.
○ If the BSL36B18 is installed in the power tool, the power
output will exceed 100 Wh and the unit will be classifi ed
as Dangerous Goods for freight classifi cation.
Power Output
Wh
2 to 3 digit number
USB DEVICE CONNECTION
PRECAUTIONS (UC18YSL3)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the
USB device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
○ Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
○ When the product is not being used, cover the USB
port with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
○ There may be an occasional pause during USB
recharging.
○ When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
○ It may not be possible to charge some USB devices,
depending on the type of device.

WIRELESS TECHNOLOGY

The Bluetooth device equipped with this product operates
on a 2.4 GHz frequency range.
To ensure proper use, please be aware of the following.
● In using this product, a radio station license is not
required as this product is granted a certifi cation
of conformance to technical standards as a low
power data communication system wireless
station facility.
● Since this product complies with the certifi cation
of conformance to technical standards, never
disassemble or modify this product.
● This product operates on the same frequency
bands as those for equipment such as microwave
ovens, digital cordless phones, wireless LAN
systems, and other Bluetooth equipment. To
avoid radio interference between the product and
the aforementioned equipment, keep the units
separated during use.
Radio signals may not reach the product.
● With the exception of this product's malfunction,
the company is not responsible for any damage
that may occur from Bluetooth communication.
● mark and logo are registered trademarks
of Bluetooth SIG, Inc., and are used under license.
● Individuals using pacemakers or other medical
devices should contact the device's manufacturer,
appropriate medical institution or dealer to verify
the eff ects of electromagnetic wave interference.
● Do not use in the vicinity of automatically
controlled devices including automatic doors and
fi re alarms.
Electromagnetic wave interference from the product
may aff ect automatically controlled devices, causing
malfunction or accident.
● Avoid use in crowded locations where an
individual wearing a pacemaker may be present.
The electromagnetic wave emitted from the product
can adversely aff ect a pacemaker's operation.
10