Moser 4330 Mode D'emploi page 9

Description of parts
A Front grill
B Air inlet aperture with removable cover
C Cold shot button
D Switch for temperature settings
E Fan settings
F On/off switch
G Hanging loop
H Mains cable
I Narrow styling nozzle
J Broad styling nozzle
K Styling diffusor (optional accessory, order no. 0210-7200)
Operation
· Connect to the mains power supply.
· The hairdryers have two heat settings and two fan set-
tings. Separate switches allow four or six temperature/
fan settings. The cold-shot switch can be used to fix the
hairstyle:
On/off switch (F):
· Switch on the appliance at the on/off switch (F) and set
the desired fan setting.
Fan-setting switch (E):
Fan setting 1, for a gentle airflow
●
Fan setting 2, for a strong airflow
● ●
· Select the required temperature setting.
Switch for temperature settings (D):
Temperature setting 1, for hot air
●
Temperature setting 2, for hotter air
● ●
Cold-shot button (C):
By pressing the button and keeping it depressed, the
hairdryer can be briefly switched to cold air. To return to
the set temperature, simply release the button.
· Using the on/off switch (F), switch off the appliance after
use.
Styling with the nozzle
The nozzle can be used to direct the airflow onto the styl-
ing brush.
· Position the nozzle and press it towards the housing
(Fig. 2ⓐ).
· To remove the nozzle, simply pull it off in the direction of
the arrow (Fig. 2ⓑ).
Cleaning and care
· Disconnect from the mains before cleaning the
appliance.
· Do not immerse the appliance in water!
· Only wipe the appliance with a soft cloth, which may be
dampened slightly.
Do not use solvents or abrasives!
· To maintain the performance of your hairdryer, regularly
clean the air inlet with a soft dry brush.
To do so, proceed as follows:
· Twist the cover in an anti-clockwise direction
(Fig. 3ⓐ) and remove.
· Clean the cover and air inlet with a soft brush
(Fig. 4).
· Replace the cover and turn in a clockwise direction
until it clicks into position (Fig. 3ⓑ).
Disposal in EU countries
Do not dispose of the appliance with domestic
refuse. As part of the EU Directive governing the
disposal of electrical and electronic equipment, the
appliance is accepted free of charge by local
waste collection points or recycling centres.
Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impacts
on people and the environment.
Disposal in non-EU countries
At the end of its service life, please dispose of the appli-
ance in accordance with statutory requirements.
ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hu
sl
ro
bg
ru
uk
el
ar
9