Handicare Dynamic Controls DX Rem 421 Manuel D'utilisation page 31

seat RWD
motor M2 battery
9005868 Powermodule DX2-PMA90L (90A)
9007596 Powermodule DX2-PMA90L Gyro (90A)
Figure 9
9.2 Technical diagram battery charger
The controller's standard confi guration includes a '3-pin connection'. Ensure that the battery charger
is properly connected so that the 'negative pole' and the 'inhibit' are connected, enabling the system to
prevent the wheelchair from moving when the battery is being charged.
Figure 10
seat FWD
bus /
motor M1 gyro
mounting holes
Technical diagrams | 31
bus
9006376B