Handicare Dynamic Controls DX Rem 421 Manuel D'utilisation page 24

24 | Driving the wheelchair with the controller
3 Driving the wheelchair
with the controller
3.1 Switching the controller on or
off
To be able to drive or operate the electric
adjustment options of the wheelchair, the
controller must be switched on. Press the on/off
button (B in fi gure 3).
3.2 Driving the wheelchair
Driving an electric wheelchair is done by
operating a joystick. Move the joystick forwards
and the wheelchair will also move forwards.
Steer left and right and the wheelchair will turn.
3.3 Speed
The maximum speed can be controlled by the
speed regulator on the controller (F1 and F2
in fi gure 3). De maximum speed is displayed
by the LED lights (D2 fi gure 3). Speed can be
controlled with the joystick while driving. If the
joystick is moved a little, the wheelchair will
move more slowly.
3.4 Driving Profi le
This controller can also be set to make the
wheelchair suitable for different driving profi les
or environments. For example, selecting
the profi le for indoors will ensure that the
wheelchair will react more 'calmly'. Once
outside, the profi le can be adjusted to a more
'robust' setting. The currently selected drive
profi le is shown on the drive profi le LED's (D2
in fi gure 3). DX REM 421 and 420 allows you
to adjust the maximum speed within different
profi les or environments.
3.5 Selecting a profi le
To switch to a different profi le, just press the
'speed regulator' button (F1 and F2 in fi gure 3).
Press the 'speed regulator' button until the most
appropriate profi le has been selected.
'+' to increase the drive profi le.
'-' to decrease the drive profi le
LEDs Meaning
Drive Profi le 0*.
The powerchair does not drive.
Drive Profi le 1.
Drive Profi le 2.
Drive Profi le 3.
Drive Profi le 4.
Drive Profi le 5.
Attendant Drive Profi le (Drive
Profi le 6).