Handicare Dynamic Controls DX Rem 421 Manuel D'utilisation page 21

2. The controller
2.1 DX REM 421 / REM 420 controller
A controller will usually have three basic functions:
• Driving and steering a wheelchair
• Operating electrical seat adjustments
• Charging the wheelchairs batteries
There are many different control systems for
wheelchairs on the market. If the controller on your
wheelchair does not resemble the one in fi gure 1 or 2
contact your dealer.
1. DX REM 421
2. DX REM 420
DX REM 421 / REM 420 by Dynamic Controls is a
collective name for the entire control system of the
wheelchair. The wheelchair is operated by means of a
controller, which includes the following components:
Figure 1
Figure 2
The controller | 21