Velleman WIFIR3 Mode D'emploi page 4

• Familiarise yourself with the functions of the device before actually
using it.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
4. Features
• with WPS function
• improves wireless coverage in all WLAN networks
• supports Wireless Repeater mode and Standard AP mode
• WLAN 802.11n (Draft 2.0) for wireless high-speed access
• downward compatible with 802.11g (54 Mbit/s) and 802.11b
standard (11 Mbit/s)
• supports 2.4 GHz WLAN networks
• maximum WLAN security with WPA2, WPA and WEP (128/64)
• software wizard for simple setup via Windows or Mac
• antennas integrated
5. Overview
Refer to the illustrations on page 2 of this manual.
1
Power indicator
2 Wireless indicator
3 WPS indicator
4
LAN indicator
6. Choose an appropriate location
• The easiest place to configure the repeater is near your
router/computer.
• Once setup is done, you can install the repeater on its final
location.
• For best performance, it is recommended to install the repeater
half-way between your router and the wireless computer with the
weakest reception.
V. 01 – 22/08/2013
WIFIR3
5
WPS button
6 Reset button
7 RJ45 network port
4 ©Velleman nv