Velleman WIFIR3 Mode D'emploi page 16

3. Select the repeater network from the list and then click
Connect.
4. If required, type the network password and click OK to confirm.
You will see a confirmation message when you are connected to
the network.
11. Web Management Tool
Wireless basic settings
In your web browser, open the web management tool and select
Wireless > Basic Settings.
The page contains various settings, including:
Disable Wireless
LAN Interface
Mode
SSID of Wireless
AP
SSID of Extended
Interface
Band
Wireless security settings
Set up the wireless security and encryption to prevent unauthorised
access and monitoring. Supported encryption methods are:
64/128-bit WEP, WPA, and WPA2.
1. Log on to the webtool and select Wireless > Security.
V. 01 – 22/08/2013
WIFIR3
If this option is selected, wireless network is
switched off.
Supports AP and Repeater modes
Main Service Set Identifier. This is the name
of your wireless network.
Universal Repeater Mode (acting as AP and
repeater simultaneously)
Supports 11B/11G/11N mixed modes.
16 ©Velleman nv