Velleman WIFIR3 Mode D'emploi page 19

12. Reset
If necessary, you can reset the repeater with a needle. Press and
hold the reset button for 10 seconds.
This will reset all the settings to factory defaults.
13. Power outage
If a power outage occurs, remove both the router and the repeater
from their wall sockets and reconnect them.
14. Technical Specifications
wireless standards
networking standards
frequency range
wireless transfer rates
power supply
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.velleman.eu. The information in
this manual is subject to change without prior notice.
Windows, Windows XP, Windows 2000, Windows Vista, Windows
Aero, Windows 7, Windows 8, Windows Mobile, Windows Server are
registered trademarks of Microsoft Corporation in the United States
and other countries.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 01 – 22/08/2013
WIFIR3
IEEE 802.11n / IEEE 802.11g / IEEE 802.11b
10/100 Mbps
2.4 - 2.485 GHz
11/54/150/270/300 Mbps
230 Vac 50 Hz
19 ©Velleman nv