Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
Specification
Template: ................................................... 12.7mm (½")
Guide bush (not included): .......................... 11.1mm (
Router cutter (not included): ....................... 6.35mm (¼")
Maximum material thickness: .................... 32mm
Horizontal width range: .............................. 140 – 300mm
Vertical width range:................................... 150 – 275mm
Weight: ....................................................... 9.5kg
Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
Work Area Safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
c) Keep children and bystanders away while operating a powered
tool. Distractions can cause you to lose control.
Personal Safety
a) Stay alert, watch what you are doing and use common sense
when operating a powered tool. Do not use a powered tool
while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating a powered tool
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-
position when not operating the tool and make use of other safety
features which prevent unintentional starting.
d) Remove any adjusting key or wrench before turning the powered
tool on. A wrench or a key left attached to a rotating part of the tool
may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewelry or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards.
4
⁄
7
16
shank -12.7mm (½") x 14˚ dovetail
Product Familiarisation
1
Horizontal Clamping Lever
2
Horizontal Clamping Knobs
")
3
Template Position Knobs
4
Fence Position Knobs
5
Fence
6
Horizontal Stop Bar
7
Template
8
Vertical Stop Bar
9
Vertical Clamping Knobs
10
Vertical Clamping Lever
Unpacking and assembly
• Carefully unpack the dovetail jig, and remove all packaging materials.
Beware of sharp edges
• The Horizontal Clamping Lever (1) and the Vertical Clamping Lever (10)
are supplied loose. The levers should be securely screwed into the
threaded holes provided so that, when clamped, the horizontal lever is
behind the jig and the vertical lever is down away from the Template (7)
Publicité
Table des Matières
