Setting The Temperature; Booster Function - Acova 40017784 Notice D'utilisation

EN

4.2 Setting the temperature

TURNING ON THE DEVICE:
Turn the
appliance on
by pressing the
Heating stop/
start button
THERMOSTAT SETTING:
Example here: 20°C setting
both elements
turn simultaneously.
46
The red
indicator
❷
will light up.
.
❶
Turn the knob for
temperature setting
clockwise to
❻
activate the heating
function
When the
desired room
The red light
❹
temperature is
comes on when the
reached, the
setting exceeds the
indicator light
ambient temperature.
goes out.
❹
In normal use,
and
❺ ❻

4.3 Booster function

This function provides a boost of extra heat when desired. When this function
is activated, the radiator operates at maximum output regardless of the thermostat
setting.
Once initiated the booster function runs for 2 hours. It can be stopped at any
time.
There are 2 ways of starting the Booster function:
• Manual booster: TIMER
• Programmed booster: TIMERPROG
MANUAL BOOSTER: TIMER
At the end of the cycle,
or after an interruption, the
appliance returns to its
operating mode set before
the boost period.
40017784 07/2018
Hold down
button .
❸
The red indicator
will flash for
2 hours:
lBooster is on.
Indicator
You can stop
stops
❹
the function
flashing.
by holding
down button
❸.
Controlling the unit
using the dedicated app (see
section 4.7) does not interfere with
the operation and programming
of your boosts.
EN
❹
47