Canceling Stereo Pair - Yamaha MusicCast WX-030 Mode D'emploi

D Use the dedicated app "MusicCast CONTROLLER" to play back.
y
• You can check which speaker is the left or right speaker with the dedicated app "MusicCast CONTROLLER" (Indicators
light as or of the table).
• In Stereo Pair mode, you can operate one speaker to simultaneously turn off both speakers or adjust the volume of both
speakers.
• If about five minutes passes while the unit cannot find the other speaker to connect to, the pairing standby mode will be
cancelled automatically.
• When in Stereo Pair mode, the option settings other than "Initialize the network setting." (☞ P.14) cannot be set.
Note
The Stereo Pair setting remains even if the speakers enter standby mode or the power cable is unplugged and plugged again.

Canceling Stereo Pair

Tap and hold (or
Indicators light from both sides to the center and Stereo Pair will be canceled.
Indicator display
Note
• The Stereo Pair can be canceled only during standby mode.
• If you cancel Stereo Pair with one of the two speakers, the other one will be canceled automatically.
• If one of the two speakers is disconnected from the network when canceling the Stereo Pair, cancel Stereo Pair on each
speaker.
) and on either speaker together for 3 seconds.
Both sides to center
STEREO PAIR
13
En