Table des Matières
Publicité
INSTALLATION
1.
CONNECT INPUT
Plug HDMI cable into input.
Input and output cables are not included with this product.
2.
CONNECT OUTPUTS
This product features pre-emphasis and equalization to overcome cable deficiencies. This
may not always be successful if poor quality cable is used.
3.
TURN POWER ON
With the switch off at the wall, connect power adaptor then turn on. Source and display
devices can be turned on before they are connected.
It is not essential to do the steps in this order, but it does assist with the automatic EDID
handshake. If you have connected everything and it is not working check the status lights to see
if they are connected, and try cycling power.
NOTE: This product can be cascaded
5
TC3-HDMI14_manual_fr
Publicité
Table des Matières
