Onkyo BD-SP309 Mode D'emploi page 50

2. Press to turn on the power.
3. Press / to select "Settings", then press
or ENTER.
4. Press / to select "Software Update
Settings", then press
5. Press / to select "Manual Update", then
press or ENTER.
6. Press / to select "USB Memory", then
press ENTER.
• If you have not yet set the Password, go to
step 8.
7. Enter the 4-digit number using 0–9.
8. Press ENTER to start checking data in the USB
memory device.
Insert USB memory device containing
the software update file.
9. During the data checking, "Checking" blinks.
Now checking the data in USB memory device.
• The current version of this unit software and
the version of the update ¿ le on the USB
memory device are displayed. To update this
player software with update ¿ le, select "Yes",
and press ENTER.
Software update file is detected in the USB memory device.
Start update?
Current Ver. :
Update Ver. :
En
50
or ENTER.
Enter 4-digit password
OK
Checking
xxxxxxxxxx
yyyyyyyyyy
Yes
No
• If the USB memory device is not properly
installed or the correct update ¿ le cannot be
found on the USB memory device, an error
message is displayed.
Check the ¿ le on the USB memory device,
and then reinsert the USB memory device
correctly.
Software update file is not detected in the USB memory device.
Confirm that you have transferred the file
to the USB memory device and retry software update.
Confirm that you have inserted the USB memory device
into the correct device.
There is more than one software file
in the USB memory device.
Confirm that only the software update file is
in the USB memory device.
10. Press ENTER to start updating.
• The screen becomes dark for a while until
the update screen can be displayed. Please
wait for the update screen to appear. Do not
unplug the AC cord.
The picture will temporarily go dark until
the software update display appears.
Wait several minutes and do not unplug the AC cord.
Now updating
Do not unplug AC cord.
*
Update Version
11. When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
• If the update has failed, check the ¿ le in the
USB device and try Software Update again.
12. Press to turn off the player.
• Delete unneeded software update data using
a PC after the software update process is
completed.
13. Remove the USB memory device.
OK
OK
OK
yyyyyyyyyy
30%