Switching The Angle; Displaying The Angle Mark - Onkyo BD-SP309 Mode D'emploi

Switching the Angle

If multiple angles are recorded, you can switch
between them.
Press FUNCTION during playback.
1
• The Function Control screen is displayed on
the TV.
2
Press / to select the Angle Number
column, then press ENTER.
3
Press / to select the desired Angle
Number, then press ENTER.
4
Press RETURN or FUNCTION to close
the Function Control screen.
NOTE
• The displayed items vary depending on the disc.
• If you access the Function Control screen
during playback of a BD/DVD video, it may
be impossible to operate the BD/DVD video
playback. In cases like this, close the Function
Control screen.
• The operation of angles differs according to each
disc. You may need to refer to the operation
manual of the disc.
• The display for angle information automatically
disappears after 5 seconds.
En
38
BD-VIDEO
1 / 3
5 5 / 2
0 0 : 2 0 : 3 0
2 English
1
1 DTS
Off

Displaying the Angle Mark

You can change settings so that Angle Mark
appears in the right bottom part of the screen when
multiple angles are recorded. The settings can be
changed in "Settings" – "Playback Setting" – "Angle
Mark Display" (Page 43).