Operating Onkyo Av Receiver Using The Remote Control; Using Hdmi Control; Using 3D - Onkyo BD-SP309 Mode D'emploi

NOTE:
• When you turn on this player for the ¿ rst time
after purchase, the language setting screen will
be displayed.
• To select the DVD disc language, such as
subtitle language, etc., see page 23.
Operating ONKYO AV Receiver
Using the Remote Control
The Universal Remote Control may operate the
basic functions of ONKYO AV Receiver.
ONKYO AV Receiver
Button
MUTING
VOL +/–
INPUT /
• Be sure to set the "Remote ID" setting to "1" on
the AV receiver.
• Depending on the unit being connected, you
may not be able to control your AV receiver using
some of the buttons.

Using HDMI Control

Direct Change
When this player is turned on, the TV is also turned
on and the appropriate external input channel
will be selected automatically. The appropriate
external input channel can also be selected on
your TV automatically when you press
the player's power is on.
Operation
Turn the AV receiver on
or off.
Mutes or unmutes the
AV receiver.
Adjust the volume of the
AV receiver.
Switch the AV receiver's
input source.
when
NOTE
• HDMI Control is available only when the TV
is connected by an HDMI cable, and when it
supports HDMI Control feature.
• Depending on the connected TV, HDMI Control
may not be performed correctly.
• Onkyo does not guarantee 100% interoperability
with other brands of HDMI Control compliant
devices.

Using 3D

This sets output of 3D images.
To view 3D images, playback of 3D content (3D BD
video) is necessary with a 3D compatible TV and
3D glasses in addition to this player.
Press 3D to change to the 3D mode.
• Each time the button is pressed, the mode
switches between "Auto (3D)" and "2D".
• The status of the selected mode will be displayed
on the TV screen.
Auto: Video signals are output as 3D when 3D
content (3D BD video) is played or as 2D when 2D
content is played.
2D: Even if 3D content (3D BD video) is played,
video signals are output as 2D at all times.
• This setting (Auto (3D)/2D) can also be
performed using the menu screen (see page 44).
NOTE
• The 3D mode can be switched only when
playback is stopped.
• Depending on the connected TV, the images
during playback may switch to 2D images due to
changes in the resolution, etc. Make sure the 3D
image setting is performed on the TV.
• The 3D images may not be output as set in
"HDMI Video Out".
• When performing Fast Forward/Reverse, images
are shown in 2D.
CAUTION
• When viewing 3D images, viewing for a long
period of time or lying on your back may cause
eye strain and discomfort. In addition, 3D images
may affect the eyesight of young children/infants,
so keep them from viewing the images.
En
21