Auto Mode; Auto Pan; Pattern - Samsung SCC-643 Manuel D'instruction

4. AUTO MODE

AUTO PAN and PATTERN functions are in AUTO MODE.

AUTO PAN

After selecting the locations of two points (PAN/TILT) of START and
END, it loops continuously in the set up SPEED.
* * MAIN MENU * *
CAMERA...
VIDEO SET...
PRESET...
Press
AUTO MODE...
[Enter]
ALARM SET...
OTHER SET...
Press
[Enter]
START SET
From "START SET...", get into the START
SET setup screen by pressing [ENTER].
After selecting the locations of PAN/TILT
location, press [ENTER] again to return to
higher menu.
END SET
From "END SET...", get into the END SET
setup screen by pressing [ENTER]. Adjust
PAN/TILT location and press [ENTER] to
return to a higher menu.
3-18
(AUTO MODE)
AUTO PAN ...
PATTERN SET 1...
RET
AUTO PAN
START SET ...
END SET ...
DIRECTION RIGHT
ENDLESS ON
SPEED STEP5
DWELL TIME 2 S
EXIT QUIT
SET START!
SET END!
DIRECTION
This sets up the movement direction of the START to END location
(PAN location standard)
"RIGHT " : "LEFT " :
ENDLESS
This is a 360-degree rotation function that stops for the DWELL TIME only in
the START and END positions without running between the START and END
positions. It can be set to "ON" or "OFF".
SPEED
This is a setting function for movement speed setup. It can be set from
STEP1 to STEP64.
DWELL TIME
This is a function for setting up the time to stay in the START to END position.

PATTERN

This is a replay function so that the MANUAL functions such as PAN,
TILT, ZOOM, and FOCUS are played for 30 seconds.
* * MAIN MENU * *
CAMERA...
VIDEO SET...
Press
PRESET...
[Enter]
AUTO MODE...
ALARM SET...
OTHER SET...
Press
[Enter]
E
(SCAN MODE)
AUTO PAN ...
PATTERN SET 1...
RET
PATTERN1 SET
3-19