Paper Jam; Maintenance And Service - Olympia PS14 Mode D'emploi

Paper jam

Always feed the paper straight into the paper infeed.
ATTENTION!
Never leave the shredder switched on when a paper jam occurs in order to
prevent injuries and damage.
1. Disconnect the power plug from the power socket.
2. Cut or tear off the remaining paper above the shredder.
3. Connect the power plug to a power socket.
4. Set the ON/AUTO, FWD, REV switch to ON/AUTO.
5. If necessary, toggle the switch alternately between FWD and REV to
loosen the jammed paper.
6. The residual paper is then ejected.
7. The shredder can now be operated normally again.
Note:
Frequent paper jams which cause the device to be shutdown by the
overheating protection facility can reduce the service life of the shredder.

Maintenance and Service

Disconnect the power plug prior to cleaning to prevent the risk of injuries.
Clean the housing with a slightly moist cloth.
Do not use any aggressive cleaning agents.
Never use any chemicals (e.g. cleaning solvent, alcohol) to clean the
housing.
19