Creating A Playback Loop; Creating A Program; Controlling Program Playback; Using Random Play - Insignia NS-BRDVD Guide De L'utilisateur

Creating a playback loop

You can play a section of a Blu-ray Disc, DVD, or
audio CD repeatedly.
To create a playback loop:
1 During playback, find the place where you
want the playback loop to begin, then press
A-B. If you want to cancel the starting point,
press CLEAR, then when you find the new
starting point, press A-B.
2 Play the disc until you reach the place where
you want the playback loop to end, then
press A-B. The playback loop starts playing
immediately.
3 To cancel the playback loop, press A-B.
Note
• The beginning and ending points of the
playback loop must be in the same title or track.
• The playback loop feature may not work with all
scenes.
• The playback loop feature does not work when
your player is in regular repeat mode.

Creating a program

You can create a program for audio CD tracks
and JPEG, MP3, or WMA files.
To create a program:
1 In stop mode, press MODE. The program
screen opens.
2 For an audio CD, press
track, then press ENTER.
Or, for a JPEG, MP3, or WMA disc or SD
Memory Card, press
(if necessary), then press ENTER. Press
or to select a file, then press ENTER.
3 Repeat Step 2 to add additional tracks or files
to the list.
4 To delete the last track or file you added,
press CLEAR. To delete all tracks and files
you added, press
at the bottom of the list, then press ENTER.
5 Press PLAY
18
or to select a
or to select a folder
or to select All Clear
to start playback.
www.insignia-products.com
Insignia NS-BRDVD Blu-ray Disc Player

Controlling program playback

To control program playback:
• To open the program screen, press STOP
twice. To close the program screen and
return to the program, press RETURN
then press PLAY
• To repeat the current track or file in the
program, press REPEAT repeatedly until
Track appears on the display.
• To repeat the entire program, press
REPEAT repeatedly until
Notes
• If you open the disc tray, remove the SD
Memory Card, or turn off the power, the
program is cleared.
• You cannot select a track to play or use random
play during program playback.

Using random play

You can play audio CD tracks or JPEG, MP3, or
WMA files in random order.
To use random play:
1 In stop mode, press MODE twice. The
Random screen opens.
2 Press PLAY
random order.

Controlling random play

To control random play:
• To set a resume point, press STOP
Press PLAY
CD track starts playing where you stopped. A
JPEG slide show starts playing at the file
where you stopped.
• To cancel random play, press STOP
The Random screen opens. Press MODE.
Random play is cancelled.
• To repeat the current track or file, press
REPEAT repeatedly until
on the display.
• To repeat the entire random selection, press
REPEAT repeatedly until
Note
You cannot go to the previous track or file during
random play.
.
All appears.
. Tracks or files play back in
once.
to resume playback. An audio
Track appears
All appears.
,
twice.