Resetting The Scales; Cleaning; Fault/Remedy - ADE Alessia Mode D'emploi

Resetting the scales

Reset the scales to factory settings if unusual or obviously incorrect values are shown
on the display.
1. Remove the batteries from the battery compartment and wait a moment.
2. Re-insert the batteries. Pay attention to the correct polarity of the batteries (+/-).
The plus pole (+) for both batteries must point upwards.
After switching the scales on, you can start weighing as usual.

Cleaning

NOTE on material damage
− Do not immerse the scales in water or other liquids.
− Do not under any circumstances use harsh, scraping, or abrasive
cleaning agents or the like to clean the scales. If you do, the surface
could be scratched.
The scales should be cleaned immediately after use, especially if they have come
into contact with fat or oil, spices, vinegar, and other strongly spiced and/or coloured
foodstuffs.
− Wipe down the scales as needed using a lightly dampened, soft cloth. Avoid
contact with citric acid.

Fault/Remedy

Fault
No function.
The scales appear to be displaying
false weighing results.
"O-Ld" is shown on the display.
"Lo" is shown on the display.
Kitchen Scales KE 1600
Possible Cause
‚ Are the batteries empty or have they been
inserted incorrectly?
‚ Are the scales standing on a firm, even
surface?
‚ Is a device that can cause electromagnetic
disturbances located in the vicinity of the
scales?
‚ Remove the batteries from the scales and
wait a moment. Re-insert the batteries.
‚ The maximum capacity of the scales (5 kg)
has been exceeded.
‚ The batteries are empty (see "Inserting/
changing batteries").
Resetting the scales
19