Using The Gun Grip; Troubleshooting - Panasonic FZ-VGGX111U Instructions D'utilisation

Using the Gun Grip

Before use:
R Enable gadgets using the external device setting in the unit.
R Check that the screws are firmly tightened and the grip is correctly attached
before use.
Hold the grip as indicated in the figure, and press the trigger switch (A) to begin
scanning.
Adjust the length of the strap (B) while holding the grip.

Troubleshooting

If you experience any trouble while using this product, refer to the following
information for basic troubleshooting. If the trouble persists, contact your technical
support representative.
Scanning does not
start.
①
R The unit is not set to enable gadgets. Check the
setting.
R The grip is not attached correctly. Attach it correctly.
R The terminals are dirty. Clean the terminals.
②
9