Panasonic FZ-VGGX111U Instructions D'utilisation page 7

5. Confirm the left and right
orientation, and attach the corner
rings with long attachment screws
as shown in the illustration.
R Take care not to attach the corner rings
with the left and right reversed.
R Use the included new screws.
Important:
R When fastening the screws, be sure to tighten them using a torque screwdriver
set to the specified torque (0.3 [N•m]). If the tightening is weak, the base or
corner rings may detach due to loose screws and the unit may fall. Also,
tightening too strong may damage the unit, base, or corner rings.
R After attachment, check that the screws are flush or not skewed. If they are not
flushed, they may come loose.
R Take care not to strip the screw holes.
R We are not responsible for any damage resulting from attachment using
procedures other than that specified.
R If a neck strap, etc. is attached to the corner rings, take care not to get it caught
when inserting the unit into the cradle. Otherwise, it may result in the unit not
being inserted properly or result in damage to the terminal section.
7