Attaching The Base - Panasonic FZ-VGGX111U Instructions D'utilisation

Attaching the base

1. Turn off the unit, and place it on a
flat surface such as a desk with the
screen face down.
R Make sure there are no foreign objects
under the unit.
2. Remove the screws with a Phillips
screwdriver (bit No. 1), and remove
the back panel (A) on the back of
the unit.
R If there is dirt or dust, wipe it off with a
dry, soft cloth.
3. Set a torque screwdriver (bit No.1) to
0.3 [N•m].
R It will be used to fasten the attachment
screws.
4. Attach the base (B) to the back of
the unit with long attachment
screws (C) and short attachment
screws (D).
R Attach the screws in order from A to F in
the illustration.
R Use the included new screws.
6
①
④
②
E
A
D
③
F
C
B