Foreword; Information About The Manual; Notes On The Operating Instructions; Representation Of Safety Instructions - Kerbl C 10 Mode D'emploi

(EN) Read and pay attention to these operating instructions before assembly and initial
commissioning! Keep these operating instructions for future reference!

1. Foreword

1.1 Information about the manual

We reserve the right to make changes due to further technical development compared to the data and illustrations mentioned in this manual.
Reprints, translations and reproductions in any form, including excerpts, require the written consent of the manufacturer.
This manual is part of the scope of delivery.
• It must be kept close at hand and remains with the unit even if it is sold.
• This manual is not subject to a revision service. The respective current status can be obtained from the specialist trader or directly from the
manufacturer.
• It has a modular structure and refers exclusively to the named product.
• These operating instructions describe the operation, use and maintenance of the unit.
The safety instructions are intended to prevent personal injury, damage to animals and damage to the unit (material damage). All operators are
required to read and observe these safety instructions at all times. The manufacturer accepts no liability or warranty for damage and malfunctions
resulting from non-observance of the operating instructions!

1.2 Notes on the operating instructions

Document No.: 27488
Version/revision: 1.0
Creation date: 2021-08-23
Last change: 2021-08-23
Language of the original operating instructions: German

1.3 Representation of safety instructions

1.3.1 Safety instructions in the operating instructions

Danger!
Imminent danger which leads to serious physical injury or death.
Caution!
Risk of physical injury to people and animals and material damage if used incorrectly!
Important!
Potentially harmful situation that could damage the product or an object nearby.

1.3.2 Safety instructions on the control unit and the unit

Warning - electrical voltage!
Warning - hot surface!
Hot surfaces such as machine components, containers, operating materials or fluids are not always obvious.
Potential equalisation must be established at the designated place.
Follow the instructions!
Read the instructions before installing and starting work and/or operating the unit.

1.4 Manufacturer data

Albert Kerbl GmbH
Felizenzell 9
D-84428 Buchbach
Tel. +49 (0)8086 933 100
Fax +49 (0)8086 933 500
E-mail info@kerbl.com
Web www.kerbl.de
33