Getting Started; Connecting The Product; Connecting To The Digital Source (E.g. Tv); Connecting To Your Audio Amplifier - Marmitek CONNECT DA51 Guide Utilisateur

4

Getting started

Please take the following steps before using the product:
x
Connect your TV (or other digital audio source; Blu-ray
player, game console, decoder/set-top box, etc.) to the
Connect DA51.
x
Select the desired audio input.
x
Connect your audio amplifier to the Connect DA51.
x
Power the Connect DA51.
We will now explain this step by step.
4.1

Connecting the product

4.1.1

Connecting to the digital source (e.g. TV)

Connect the Toslink/optical cable or coaxial cable of your TV (or
other source) to the Connect DA51's 'optical' (1) or 'coaxial' (2)
input.
Set the input select switch (5) to 'optical' or 'coaxial', depending on
the input selected above.
4.1.2

Connecting to your audio amplifier

Connect your analogue audio amplifier to the Connect DA51 via
the R/L output (8)
4.2

Power Supply

Connect the included power adapter (B) to the Connect DA51 (4)
via the micro USB cable (C). Plug the power adapter into the wall
outlet.
Connect DA51 7