Sharp AN-52AG1 Mode D'emploi page 23

Use the following procedure to determine the position for mounting the LCD
television on the wall so that it will be installed correctly.
(1) Place tape, etc., to mark the four corners of the LCD television to be
mounted on the wall to show the dimensions of the television.
(2) Draw diagonal lines from the 4 corner marks and mark the intersection of
the lines. This is the position of the center of the TV screen.
(3) Align this mark with the display center stamped on the based bracket, and
then mount the based bracket on the wall.
(4) After mounting the wall-mount bracket unit to the LCD television, use the
dimension marks on the wall (4 corners of the TV) to install the TV on the
based bracket.
(5) Remove the tape marks from the wall.
[Example] When LC-52GX1 (under speaker type) is mounted on the wall.
How to Install on the Wall
1 8 0
1 2 6 4 (
5 2 G X
1 )
1 5 1
4 3 0
3 0 0
Wall guide
marks
Tape
Dimension guide
marks
Unit: mm
7 6 1
E-5