Cleaning And Maintenance - Proline CDEP70-E Notice D'utilisation

Cleaning and maintenance

Cleaning lint filters
To ensure that the appliance works perfect-
ly, the lint filters in the door and in front of
the drum must be cleaned after every dry-
ing cycle.
Caution! Important. Never operate the
dryer without the lint filter or with a
damaged or blocked lint filter.
1. Open loading door
2. Use a damp hand to clean the micro-
fine filter, which is built into the lower
part of the loading aperture.
3. After a period of time, a patina due to
detergent residue on laundry forms on
the filters. When this occurs, clean the
filters with warm water using a brush.
Remove the filter from the door pulling
it out. It can be positioned with the
tooth facing to the left or to the right).
After cleaning do not forget to put it
back.
4. Remove fluff from lint filter, preferably
using a damp hand for this purpose.
5. Replace the filter.
Cleaning heat exchanger
Clean the condenser when light
denser comes on.
Caution! Operating when the heat
exchanger is blocked with fluff can
damage the dryer. This also increases
energy consumption.
1. Open door in plinth: To do this, press
the release button on the right and
open the door in the plinth to the left.
2. Clean fluff from the inside of the door
and the heat exchanger front chamber.
Wipe the door seal with a damp cloth.
3. Turn both lock washers inwards.
41
Con-