What To Do If; Troubleshooting By Yourself; Technical Data - Proline CDEP70-E Notice D'utilisation

Clean control panel and housing
Caution! Do not use furniture cleaners
or aggressive cleaning agents to clean
the machine.

What to do if ...

Troubleshooting by yourself

1)
Problem
Dryer not connected to mains supply.
Dryer does
not work. Loading door opened.
The START PAUSE button not pressed.
Incorrect programme set.
Fluff filters clogged.
Heat exchanger clogged.
Unsatisfactory
Max. loading exceeded.
drying results.
Covered ventilation grill.
Residue inside the drum.
To little free space around the appliance
Loading door
does not Filters not locked in place.
close
Programme
Full water reservoir.
inactive
Drying cycle Small laundry volume./Too dry laundry
to short for selected programme.
Fluff filters clogged.
To high loading volume.
Drying cycle
Laundry insufficiently spun.
4)
to long
Particularly high room temperature - no
machine fault.
1) Switch the dryer off. Set programme/time. Press the START PAUSE button.
2) follow program recommendation - see Programme overview chapter
3) see Care and cleaningchapter
4) Note: After around 5 hours the drying cycle ends automatically (see Drying cycle complete section).

Technical data

height x width x depth
drum volume
depth with the load door opened
adjustable height
Possible cause
Use a damp cloth to wipe down the control
panel and housing.
Plug in at mains socket. Check fuse in
fuse box (domestic installation).
Close loading door
Press the START PAUSE button.
Set suitable programme.
Clean fluff filters.
Clean heat exchanger.
Respect max. loading volume.
Uncover ventilation grill in base area.
Clean the drum inside.
Ensure min. 5cm free space around the
appliance
Install fine filter and/or snap course filter
into place.
Empty water reservoir
PAUSE button.
Select time programme or higher drying
level (e.g. EXTRA DRY ).
Clean fluff filters.
Respect max. loading volume.
Spun adequately the laundry.
Lower the room temperature if possible.
85 x 60 x 58 cm
108 l
109 cm
1.5 cm
Remedy
2)
3)
3)
3)
, press START
43