This simplified guide of the Parrot Digital Frame by Andrée
Putman gives you the main instructions to easily use this
product. For more information, refer to the our website
www.parrot.com.
Index
Installing of the frame....................................................
via Bluetooth ® .............................................................
Using the frame for the 1st time
Installing the frame
1. Screw the metal rod into the back of the frame.
> If you rotate the frame, the photo displayed turns to
match the new position of the Parrot Frame by
Andrée Putman.
11
2. Connect the power cable connector to the transformer
11
and plug it into an electrical socket.
12
> The frame automatically switches on.
12
In order to avoid any display problem, make sure
12
the power lead connector is fully plugged into the
transformer.
12
13
3. Choose the language to be used.
13
The frame can also be hung on the wall. In this case,
13
screw the hook into the back, insert the provided
14
clips into the slots and run the power lead through
14
the clips.
14
14
English
11