essentiel b INCLIN'TV 32''-75'' Notice D'utilisation page 17

installation of tilting arms
Cover a stable, fl at surface with a soft cloth.
•
Place the screen of your appliance on the soft cloth.
•
Locate the threaded mount points on the back of the screen.
•
!
Determine the correct screw length by carefully inserting a match or toothpick and
marking the depth of the mount point. Refer also to the operating instructions for your
30
screen.
Depending on your screen model and the depth of the mount point, we advise you to use the following
combinations of screw fi xings (screws + washers + 1, 2 or 3 spacers):
12 ou M5x12
12 ou M5x12
12 ou M5x12
M6x12 ou M8x16
Position
Mettre
the knob
la molette
outwards
vers
l'extérieur
Bottom Bas
M4x30 ou M5x30
M4 x 12 metal
screws
or
M5 x 12 metal
screws
M4/M5 washers
M8-4 spacers
(if needed)
Haut Top M6x35 ou M8x40
M4 x 30 metal M6 x 16 metal
screws
or
M8 x 16 metal
M5 x 30 metal
screws
M4/M5 washers
M8-4 spacers
and/or
M8-4 spacers
M8-8 spacers
and/or
M8-12 spacers
M6 x 35 metal screws
screws
M8 x 40 metal screws
or
M8 x 45 metal screws
screws
No washers No washers
M8-4 spacers
M8-8 spacers
(if needed)
M8-12 spacers
Sachets
installation of tilting arms
or
or
and/or
and/or
1~4
5
17 7
V.1.0 V.1.0