Before inserting the screws, don't forget to leave suffi cient space behind your screen to
•
accommodate the connectors of your multimedia devices (scart cable, HDMI cable...) by
using the different models of spacers.
The use of angled or jointed cables is sometimes necessary to avoid damaging the connections
•
to your screen.
If your screen has a curved back or a recessed mount point, a spacer must be used.
Choose the spacer which is the closest to the depth of the recess in order to hold the bracket as close
to the screen as possible.
Place the spacer between the fi xed arm and the screen. Use the washers provided with the M4-M5
screws for optimal stability.
Attach each arm to the screen, aligning the holes in each arm with the threaded inserts on the back panel
of your screen, inserting the screws through the two holes and turning clockwise using a crosshead
screwdriver until they are completely tight.
18
8
V.1.0
V.1.0
installation of tilting arms
X
TV
Possibilité de superposer
It is possible to superimpose
TV
1 to 3 spacers
1 à 3 entretoises
TV