Operating instructions
BEFORE INSTALLING THIS PRODUCT, IT IS IMPORTANT TO READ AND UNDERSTAND THE
INSTALLATION INSTRUCTIONS COMPLETELY IN ORDER TO AVOID PHYSICAL INJURIES AND
MATERIAL DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN A PLACE WHICH IS EASILY
ACCESSIBLE SO YOU CAN CONSULT THEM AT A LATER DATE.
The safety instructions must be followed throughout the installation of this product. User safety
equipment and suitable tools for installation in order to avoid physical injury.
If the product were to be sold or given to
•
another person, make sure that the operating
instructions are passed on with it and that no
parts are defective.
This wall mount bracket is able to support a
•
maximum load of 45 kg for screens with a diagonal
measurement of 32" to 75" maximum. Ensure that
the wall structure can support such a load.
The weight of the screen must not exceed the
•
maximum load capacity of the bracket.
It is essential that you follow a correct installation
•
procedure. This must be carried out by two
qualifi ed people. Non-compliance with the
installation instructions may lead to severe
physical injury, linked to falling or incorrect
handling of the screen.
Do not install the bracket on a structure which is
•
subject to vibrations, movement or which may
be subject to impacts. Non-compliance may
lead to the screen being damaged or the surface
of the bracket being damaged.
Do not install the bracket in a place of passage in
•
order to avoid knocks and injuries (above a bed,
a chair, a door or in a corridor...).
Do not install the bracket near heating, a
•
fireplace, direct sunlight, air-conditioning
or other sources of direct heat.
Non-compliance may lead to the screen being
damaged and may increase the risk of fi re.
Do not install the bracket in a very damp
•
environment.
One month after installation, check that all the
•
screws are tight and that the wall plate has been
correctly attached to the wall.
Please note: Please check that there are no
•
cables or pipes behind the wall to which you
wish to attach your bracket!
Check the position of the electric cables when
•
you install or handle the wall bracket, in order to
avoid any pinching or deterioration of the cables.
The screw fi xings supplied with this wall bracket
•
are intended exclusively for fi xing to a wall made
up of solid bricks or concrete.
For installation on any other medium (wood,
•
hollow bricks, plasterboard surfaces, steel...)
please
contact
installer, and use the appropriate equipment.
Before beginning installation, please check
•
the composition of your wall. Do not install the
bracket on old or badly sealed brickwork, on a
plasterboard surface or wood panelling.
Keep children away from the installation and
•
ensure that they cannot play with the appliance
subsequently.
The packaging material (packaging paper,
•
g
polystyrene) can be dangerous for children: there
is a risk of suffocation. Do not leave packaging
material within reach of children!
an
approved
professional
V.1.0
V.1.0
15
5