TERMA MOA Mode D'emploi page 8

Electric Heating
Element
Safety requirements
— installation
1. Fitting and connection of the heating element should
only be performed by a qualified installer.
2. Connect the unit to a sound electrical installation (see
the ratings on the heater).
3. Switching on the heating element in the open air to test
the device is permitted for a maximum of 3 seconds.
4. Never test a heating element that is already installed.
Do not turn the heating element on in an empty
radiator!
5. Ensure that the power cord does not touch the hot
parts of the heating element or radiator.
8
User manual MOA www.termaheat.pl