Changing The Sewing Direction; End Of Sewing; Storage; Reordering Needles - easymaxx MS-202 Mode D'emploi

changing the Sewing Direction

1. Stop the sewing machine at the point where you want to change the sewing direction and
such that the needle is positioned in the fabric.
2. Raise the presser foot and turn the fabric to face the new direction, using the needle as the
fulcrum.
3. Lower the presser foot and continue sewing in the new direction.

End of Sewing

4. Cut through both threads approx. 15 cm from the fabric so that enough thread is left over
to secure the seam by hand.
5. To prepare the sewing machine for the next seam, pull approx. 15 cm of thread out
backwards.

Storage

• Push the thread spool pin into the device.
• Place a piece of fabric under the presser foot and then lower it.
• Disconnect the mains adapter from the mains and then from the device. Pull the plug for the
foot control out of the device.
• If you do not intend to use the sewing machine for a lengthy period of time, take the
batteries out.
• Store the device and accessories in the original packaging and keep it out of the reach of
children and animals in a dry place at temperatures of between 0 and 40°C.

Reordering needles

You can obtain original spare parts and accessories via our website:
www. service-shopping.de!
04135_DE-GB-FR-NL_V3.indb 29
1. Stop the sewing machine.
2. Turn the hand wheel to bring the needle up to its highest
position.
3. Raise the presser foot and carefully pull the fabric out to the
left.
29
04.01.13 10:48