HYDROPONIC
C
H
I
L
1.3
DECLARATION OF CONFORMITY
Via G. Ricci Curbastro, 8 - 48124 Fornace Zarattini, RAVENNA – Tax Code and VAT no. 01075610392
DECLARES, ASSUMING FULL RESPONSIBILITY, THAT THE NEW PRODUCT:
TO WHICH THIS DECLARATION REFERS COMPLIES WITH THE FOLLOWING PROVISIONS:
IT HAS BEEN PRODUCED IN ACCORDANCE WITH THE FOLLOWING HARMONIZED STANDARDS:
Code of the Standard used: EN 60335 - 1 / EN 60335 - 2 - 55 AND SUBSEQUENT AMENDMENTS
Code of the Standard used: EN 61000 - 6 - 1 / EN 61000 - 6 - 3 AND SUBSEQUENT AMENDMENTS
Name: Turci Bruno
Turci Bruno
Manager
nager
1.4
EC IDENTITY PLATE
This chiller has been produced in a state belonging to the European community, therefore meets the safety
requirements of the Machinery Directive 2006/42/EC , in force since 29 December 2009.
This conformity is certifi ed and on the product there is the marking "CE " , located on the bottom of the unit (
Ref. A3 Fig. 4).
2
PRODUCT OVERVIEW
2.1
DESCRIPTION OF THE CHILLER
This product is suitable for water conditioning in hydroponic systems.
It is compatible with life of plants and organic compounds.
The chiller should not be used for purposes other than those provided for and specifi ed above.
Any other use than that for which the product was made may cause hazardous conditions.
2.1.1
Package Contents
Open the box and verify that the following accessories are present (Fig. 5):
D Instruction Manual
F
Pipe connection fi ttings (including gaskets)
G Cable-tie-wrap
Check the technical plate of the unit (Ref. A3 Fig. 4) to make sure that the device contained in the package
matches the model you purchased.
8
L
E
R
TECO S.R.L. – REFRIGERATION TECHNOLOGIES
Legal, Administrative and Commercial Premises:
- ELECTROMAGNETIC COMPATIBILITY DIRECTIVE 2004/108/EC
- LOW VOLTAGE SAFETY DIRECTIVE 2006/95/EC
Electromagnetic Compatibility
The person authorized to draw up this statement:
Via G. Ricci Curbastro, 8 - 48124 Fornace Zarattini, RAVENNA
L
I
N
E
THE UNDERSIGNED
MOD.: HY150
Safety
EN
Ravenna 09/01/2017
1
2
2