Bellman & Symfon Bridge BE1520 Mode D'emploi page 49

97
The following signal patterns for the Bellman Visit System are available to
the Bellman Visit 868 Bridge:
Type LED-pattern
Green Green is constantly it
Yellow Yellow is constantly it
Orange Orange is constantly lit
VMA Red and Orange constantly
blink alternately
Fire alarm Red blinks constantly
Sound Vibration
1 x ding dong, lowfrequency Long
tone
1 x ring, lowfrequency tone Short
Baby Long
VMA constant Constant
Fire alarm constant Constant
Setting the Activation Pattern
The Bellman Visit 868 Bridge can be activated in two different ways.
On delivery the Bellman Visit 868 Bridge transmits the same signal regardless of the input causing
Flash
the activation.
By changing the Signal Switches (4), different inputs on the same Bridge can transmit different
Yes
Signal Patterns.
In this way the same Bridge can be used to forward signals from the Bellman Visit System to the
Bellman Visit 868 System and vice versa at the same time as it can transmit a Door Signal when
Yes
activated via the Exterior External Trigger (3) and a Baby Cry signal when activated via the Test
Yes
Button (2).
The figure below shows the standard settings that are available:
Yes
Signal Pattern for the Bellman Visit
Yes
Signal switch Exterier External
Signal pattern for the Bellman
868 System when activated by: Visit System when activated by:
Pushbutton Exterior external
Trigger
Green 1 Green 1
Green 2 Green 2
98
Pushbutton
trigger
Green Green
Green Green