Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
38
Bellman Visit 868 Bridge, BE1520
Thank you for choosing products from Bellman & Symfon.
The Bellman Visit 868 System consists of a number of radio transmitters and receivers.
The transmitters detect different events in the surrounding area and transmit a radio
signal to the receivers. The receivers pick up this signal and provide indications using
light, sound and/or vibration.
The transmitter determines what type of light, sound or vibration should be displayed so
that the reason for the indication is evident.
Read through the entire user manual first and then start to install the system.
Refer to the illustration of the Bellman Visit 868 System on the inside of the cover.
This is how the Bellman Visit 868 Bridge works
The Bellman Visit 868 Bridge conveys signals between the Bellman Visit System and the Bellman
Visit 868 System. With a Bellman Visit 868 Bridge, you can therefore use products from the old
and new system side by side.

Getting started

Unpacking, installing and testing the unit
1. Open the battery cover (7). Connect the power supply unit to the socket (6), fit one back-up
battery, either a 6LR61 alkaline or 6F22 lithium type battery, and close the battery cover.
2. Press the Test Button (2). The Bellman Visit 868 Bridge lights up the LED (1) to indicate that
the unit is transmitting a radio signal. The Bellman Visit 868 and Bellman Visit receivers will
indicate the Door Signal.
3. Mount the Bellman Visit 868 Bridge on the wall either using the self-adhesive Velcro tape
or suspended on the wallmount bracket (8) on the screw supplied. If the Velcro tape is used, the
wall on which the transmitter is to be positioned can be cleaned using the enclosed wet wipe. The
Bellman Visit 868 Bridge can also be placed on a level surface, e.g. a table, but you should avoid
placing it on the floor.
Function
General
The BE1520 Bellman Visit 868 Bridge is a product for indoor use and operates as an interpreter,
which conveys radio signals between the Bellman Visit and Bellman Visit 868 systems. With a
Bellman Visit 868 Bridge, you can therefore use products from the old and new system side by
side.
The Bellman Visit System will not of course have the same wide range of new indication options
39
CZ
DE
DK
ES
FI
FR
GB
GR
HU
IT
NL
NO
PL
PT
SE
YU

Publicité

Table des Matières
loading

Table des Matières