Bellman & Symfon Bridge BE1520 Mode D'emploi page 47

93
Appendix - Further information
Connection
Connecting an Exterior External Trigger
The BE1520 Bellman Visit 868 Bridge has the following methods of activation:
• various accessories can be connected via the Exterior External Trigger socket (3), see below.
• with pushbutton
For more information about the indications provided by the receivers in the Bellman Visit 868
System, refer to Appendix/Further information/Settings below.
An Exterior External Trigger on the BE1520 Bellman Visit 868 Bridge can be connected to the
vibrator output on several of Bellman & Symfon AB's products or to other equipment that produces
a voltage or contact for activation. In addition, the following accessories can be used:
• magnetic switch BE9023 (accessory)
• door entering contact mat BE9024 (accessory)
• a standard pushbutton.
6
1
5
2
3
4
1. Entry monitor
2. Magnetic switch
3. Pushbutton
4. Door phone
5. 3.5 mm jack plug
6. Exterior External Trigger
For further information see Appendix/Further
information/Technical information/Activation.
94