Maintenance And Service - Bosch GBL 18V-120 Professional Notice Originale

Masquer les pouces Voir aussi pour GBL 18V-120 Professional:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
OBJ_BUCH-2543-001.book Page 12 Monday, November 23, 2015 3:00 PM
12 | English
 Do not continue to press the On/Off switch after the
machine has been automatically switched off. The bat-
tery can be damaged.
The battery is equipped with a NTC temperature control
which allows charging only within a temperature range of be-
tween 0 °C and 45 °C. A long battery service life is achieved
in this manner.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Observe the notes for disposal.
Removing the battery (see figures A1 – A2)
The battery 3 is equipped with two locking levels that should
prevent the battery from falling out when pushing the battery
unlocking button 7 unintentionally. As long as the battery is
inserted in the power tool, it is held in position by means of a
spring.
– To remove the battery 3, press the unlocking buttons 7 and
pull the battery out of the machine to the rear. Do not ex-
ert any force.
Mounting the Blower Accessories
(see figures B1 – B3)
 Remove the battery before cleaning or performing main-
tenance on the blower, making tool adjustments, chang-
ing accessories or storing the blower. This safety measure
prevents the blower from being started accidentally.
See the illustration for the ways of combining the different
blower accessories.
– Insert the bayonet lock 12 of the accessory firmly into the
notches 8 of the motor housing or into the notches 8 of the
extension tube 9.
– Turn the bayonet lock a quarter turn clockwise.
Mounting the Dust Collection Tube
When blowing out bore holes, the drilling debris is blown in
the direction of the operator. For this reason, it is recom-
mended that you mount the dust collection tube 11 over the
bore hole nozzle 10.
– Place the notches 13 of the dust collection tube 11 over
the outer bayonet lock 12 of the bore hole nozzle 10.
– Turn the dust collection tube 11 a quarter turn clockwise.
Operation
 Remove the battery before cleaning or performing
maintenance on the blower, making tool adjustments,
changing accessories or storing the blower. This safety
measure prevents the blower from being started acciden-
tally.
Starting Operation
Switching On and Off
To save energy, only switch the power tool on when using it.
– To switch on the power tool, press the On/Off switch 1 to
position I or II.
Position I: Blowing together light materials.
Position II: Blowing together heavy materials.
1 609 92A 1AC | (23.11.15)
– To switch off, push the On/Off switch 1 to the stop in po-
sition "0".
Working Advice
Never blow dirt in the direction of bystanders.
Always hold the power tool approx. 3 cm above ground when
working.
Do not blow hot, flammable or explosive material.
During "blowing" operation, take care that no debris/impuri-
ties can be drawn into the air intake 4.

Maintenance and Service

Maintenance and Cleaning
 Remove the battery before cleaning or performing
maintenance on the blower, making tool adjustments,
changing accessories or storing the blower. This safety
measure prevents the blower from being started acciden-
tally.
 For safe and proper working, always keep the machine
and ventilation slots clean.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Bosch Power Tools

Publicité

Table des Matières
loading

Table des Matières