Display Contrast Regulation - aqua A-POOL SYSTEM PH-CL Manuel D'installation Et D'entretien

3.2.6 Language (EN-FR-SP-IT-PT)

3.2.7 Display contrast regulation

3.2.8 Temperature measurement Automatic or Manual
With this sub-menu it is possible to choose the way to adjust temperature compensation of
reading. Please note that Working temperature is the temperature of the water passing
through the probe holder

Automatic: needs a PT100 temperature probe that must be connected to Pool
System. If is has been selected Automatic, the system will display the absence of
probe with a N.C. messagge (and consider 25°) instead of temperature reading.

Manual: the temperature of the water passing through the probe holder can be
adjusted manually setting its value as shown below.
ADSP7000474 A-POOL SYSTEM PH-CL 11/04/2014 Rev.1.9 9/101