Arrangement And Fitting; Dimension Drawings; Installation - Stahl 8491/1 Instructions De Service

Masquer les pouces Voir aussi pour 8491/1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6

Arrangement and fitting

Always mount the device so that the sound output is oriented-downward.

6.1 Dimension drawings

Figure 6-1: Dimensions (all dimensions in mm)
7

Installation

Only trained electrical-personnel are authorized to install the devices.
Adhere to the rated voltage and current specifications. (see identification plate).
Before installing and in case of damage to the device, disconnect the device from the
power supply/mains power and secure against unintentional reconnection of the power.
• Arrange and secure the connection wiring in the wiring space.
• Connect the fuse (see Table 5-1 on page 6).
• Connect the cable end outside the hazardous area or within an EEx „e" terminal box
(see Figure "Connect the cable end" on page 8).
Arrangement and fitting
Signal horn Type 8491/1
7

Publicité

Table des Matières
loading

Table des Matières