Transport And Storage; Maintenance; Warranty; Return Of Goods - Watts VALPES VR25 Manuel D'installation Et D'utilisation

EN
INTRODUCTION
This manual has been made to guide you through the installation and use of our VR and VS electric actuators. Please, read it carefully before
using our products and be sure to keep it.
DESCRIPTION
These electric actuators have been designed to perform the control of a valve with 90° rotation (or 180° in case of 3-position version). We
cannot be held responsible for any other use. You can however consult us for any other application.
ATTENTION OWNERS AND USERS
Thank you for purchasing the device. This equipment will provide safe and productive operation as long as it is used in accordance with the
instructions in this Manual and is properly maintained. Importantly, unless the user is adequately trained and supervised, there is a possibility
of death, serious personal injury, property damage or damage to the equipment.
Owners and users of this equipment bear the responsibility to make certain that this equipment is used properly and safely. READ THIS
MANUAL carefully, learn how to use and service this equipment correctly, and strictly follow all of the instructions contained in this Manual
and the requirements of local law. Failure to do so could result in death, serious personal injury, property damage or damage to the equip-
ment. This Manual should be considered a permanent part of your machine and should be kept available for easy reference by any user.
Owners should not permit anyone to touch this equipment unless they are over 18 years of age, are adequately trained and supervised, and
have read and understand this Manual. Owners should also ensure that no unauthorized personnel come in contact with this equipment.
If this equipment, or any of its parts, becomes damaged or needs repair, stop using the equipment and contact an experienced service indi-
vidual immediately. If the warning labels or this Manual are misplaced, damaged or illegible, or if you require additional copies, please contact
us for these items at no charge.
Please remember that this Manual and the warning labels do not replace the need to be alert, to properly train and supervise users, and to
use common sense when using this equipment.
If you are ever uncertain about a particular task or the proper method of operating this equipment, don't hesitate to contact us.

TRANSPORT AND STORAGE

 The forwarding agents being held as responsible for damages and delays of the delivered goods, the consignees are obliged to express if
applicable their reserves, prior to accept the goods. The goods delivered directly ex works are subject to the same conditions.
 The transport to the place of destination is carried out by using rigid packing material.
 The products must be stored in clean, dry, and ventilated places preferably on appropriate palettes or shelves.

MAINTENANCE

 Maintenance is ensured by our factory. If the supplied unit does not work, please check the wiring according to the electric diagram as well
as the power supply of the concerned electric actuator.
 For any question, please contact our after-sales service.
 To clean the outside of the actuator, use a lint and soapy water. DO NOT USE CLEANING PRODUCT WITH SOLVENT OR ALCOHOL

WARRANTY

 100% of the actuators are fully tested and set in the factory.
 These products are 3-year warranty from the delivery date or 50,000 actuations against all types of manufacturing and material faults
(operating time and model class according to standard CEI34).
 This guarantee will only be valid if the unit has not been disassembled or self-repaired during its service life. It does not cover any wear and
damage caused by shocks or faulty operation neither by the use of the unit under conditions not in accordance with its nominal character-
istics. The guarantee is strictly limited to the replacement of original parts found defective on checking by our service personnel. The cost
of shipping to our premises, the return of devices to the customer as well as the repair cost will be chargeable. We will not assume the
responsibility for any direct or indirect accidents/risks originated by a failure of our products. The guarantee does not cover the conse-
quences of breakdown and excludes any payments for indemnities. The accessories and adaptations are excluded from the guarantee. In
the case where a customer has not proceeded to payments within the agreed period, our guarantee will be suspended until the delayed
payments have been received and with the consequence that this suspension will not prolong the guarantee period in any case.

RETURN OF GOODS

 The customer is obliged to check the conformity of the goods with regard to their definition at the time of delivery.
 The acceptance of the goods by the purchaser disclaims the supplier of all responsibility if the purchaser discovers any non-conformity
after the date of acceptance. In such case, the repair cost will be borne by the purchaser who will also exclusively bear all financial conse-
quences of any resulting damage. Returned goods will only be accepted if our prior agreement has been given to this procedure : the
goods must be sent free of all cost and being shipped solely and in their original packing. The returned goods will be credited to the pur-
chaser with a reduction of 40% on the unit's price charged in accordance with the original invoice of the returned goods.

SAFETY INSTRUCTIONS

 The electric power supply must be switched-off before any intervention on the electric actuator (i.e. prior demounting its cover or manipu-
lating the manual override knob).
 Any intervention must only be carried out by a qualified electrician or other person instructed in accordance with the regulations of electric
engineering, safety, and all other applicable directives.
 Strictly observe the wiring and set-up instructions as described in the manual: otherwise, the proper working of the actuator can not be
guaranteed anymore. Verify that the indications given on the identification label of the actuator fully correspond to the characteristics of
the electric supply.
 Respect all safety rules during fitting, dismantling and porting of this apparatus.
 Lifting and carrying through strapping the hand wheel is not allowed.
 Do not mount the actuator « upside down ». Risks:
 Declutching mechanism failure
 Possible flow of the grease on the electronic board
 Do not mount the actuator less than 30 cm of a electromagnetic disturbances source.
 Do not position the equipment so that it is difficult to operate the disconnecting device.
DSBA3400 • Rév. 30/06/2020
To be read prior to the installation of the product
27