Spare And Wear Parts; Maintenance And Care; Warranty And Returns; Additional Information - Bohle Veribor BO 601.1BL Instructions D'installation

Never use pointed or sharp objects (e.g.
¡
screwdriver) for lifting the suction pad.
Storage
11
Never set the suction device down with the
¡
rubber pad resting on a sharp object.
Always store the suction lifter in a clean, dry
¡
and dark location and, when possible, in a
storage case.
Maintenance and
12
Care
Always keep the suction lifter and especially
¡
the suction pad clean and free from oil,
grease and dust.
Never expose the rubber pad to sunlight for
¡
a prolonged period of time. Otherwise it will
lose its elasticity quicker and may become
brittle.
Clean the suction surfaces regularly (at least
¡
weekly) with Bohle Special Glass Cleaner
(BO 51 079 11).
Do not use aggressive chemicals (e.g.
¡
solvents, petrol, rubber detergents or
softeners) to clean the rubber pad.
The rubber pad is a wear part (subject
¡
to wear, ageing). Replace the rubber pad
at least every 2 years or as soon as it is
damaged.
NOTE
Please also observe DIN 7716 "Rubber products;
requirements for storage, cleaning and
maintenance".
WARNING
Faulty or wrong spare parts significantly
impair safety. They can cause damage,
malfunctions through to a complete failure.
Only use original spare parts.
¡
Spare and Wear
13
Parts
Bohle holds different spare and wear parts in
stock.
Please contact us if you require spare parts:
saugheber@bohle.de
+49 2129 5568-0
Warranty and
14
Returns
Returns service
retourenservice@bohle.de
T +49 2129 5568-549
Additional
15
Information
If you have any questions that are not answered
in these operating instructions, for example, about
specific problems or special applications, please
contact our specialist personnel.
For further language versions, please visit www.bohle-group.com.
EN
21