Technical Data; Ec Declaration Of Conformity - Bohle Veribor BO 601.1BL Instructions D'installation

Technical Data

04
Product Pump type
Pump tappet with coloured ring
601
601G Pump tappet with coloured ring
Pump tappet with coloured ring
601.45
Pump tappet with coloured ring
601.2
Priming pump with pressure gauge
601.1BL
601.8 Priming pump with pressure gauge
The suction lifters are subject to a regular load test carried out by Bohle under the conditions described in
the operating instructions. The maximum load capacities achieved in this test are halved and indicated as
permissible load capacity (see Technical Data). The tool therefore has a safety factor of 2.

EC Declaration of Conformity

05
in compliance with Directive 2006/42/EC, annex II, part 1 A
Bohle AG
Dieselstr. 10
D - 42781 Haan
Authorised Representative for the Compilation of Technical Documentation:
Edgar Höhn, Bohle AG, Dieselstraße 10, D - 42781 Haan
We hereby declare that the delivered models of the "manual suction lifter" products
Type
comply with the relevant provisions:
EC Machinery Directive (2006/42/EU, Annex I)
¡
Applicable harmonised standards, especially DIN EN 12100
¡
Haan, 20/06/2017
Dr. Thorsten Böllinghaus, Chairman Bohle AG
Dieselstraße 10, D - 42781 Haan
16
Rubber pad
ø 214 mm
ø 214 mm
ø 214 mm
ø 220 mm
ø 214 mm
80 x 380 mm
601.1BL, 601BL, 601, 601.45, 601.2, 601.8, 601G
Carrying
Intended use
capacity
120 kg Flat surfaces
120 kg Flat surfaces
110 kg Flat and textured surfaces
Flat, strongly textured and
80 kg
curved surfaces
120 kg Flat surfaces
80 kg Flat surfaces